Acrylic acid and its esters such as Methyl acrylate, Ethyl acrylate, Butyl acrylate and 2-Ethylhexyl acrylate, are known as basic acrylates.

Uses: RESINS AND COATINGS. More 

Acid containing, cross-linked acrylic emulsion copolymer. When the emulsion is diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in improving low shear rate (Brookfield) viscosity, resulting in paints that have highly shear thinning characteristics. Paints formulated with ACRYSOL ASE-60 Thickener as a sole thickener offer a high yield value or gel structure. More

Hydrophobically modified ethylene oxide urethane (HEUR) high-shear rheology modifier for waterbased coatings. Solvent-free, non-ionic, urethane associative thickener offering very versatile means of formulating paints with an optimal film build and high shear viscosity. More

Epoxy phosphate additive for waterborne stoving enamels. Improves adhesion and corrosion, chemical and stain resistance. 

A universal dispersing resin for the preparation of pigment concentrates, Afcona 1101 must be combined with a high molecular weight dispersant from the Afcona 4000 Series or Afcona 5280. It is compatible with most resin systems, including polyurethane, alkyd melamine, acrylic melamine, polyester melamine (butylated and HMMM grade), acid curing etc. More

A solvent-free wetting and dispersing agent which offers a modern and economical countertype to many old fashioned dispersing agents. Afcona 5209 stabilises the pigments through electrical charge repulsion forces. It is very effective in bentonite gel preparation. More

A maleic anhydride grafted (MAH) HDPE to promote adheasion of PE to nylon, EVOH, metal, cellulose and etc. Suitable for film extrusion and fiber spinning. More

Clear Styrenic Block Copolymer (SBC). Asaflex™ 800S has the highest rigidity among all Asaflex grades. Suitable for injection molding. More

Used as a modifier for GPPS. It has the lowest haze among all Asaflex grades and can improve impact strength while maintaining transparency. When used solely, it is also well suitable for blow molding such as plastic gardening ampoules. More

Low mill shrinkage and good fluidity in processing. Bright color compounds.

Applications: Automotive tire treads, carcasses, and camelbacks; belts, hoses, coatings, dampers, footwear, sponges, bicycle tires, and other fields. More

Superior wear resistance, low temperature characteristics

and groove crack resistance, along with good processability. More

Dow's AVANSE™ Technology is the most advanced, acrylic platform delivering next generation performance for architectural and industrial coatings. More 

Azaduct P115 is a hard resin of esterified rosin maleine adduct.

Recommended to be used in combination with long oil alkyd resins and siccative oils forming lacquers and enamels with enhanced properties. More

Azalchid S 63 65% is sdoybeanoil based long oil alkyd resin. It is recommended for manufacturing air drying enamels and primers, used for decoration or protection in industrial fields. More

Azalchid S 63 80% VR – long oil alkyd resin, high solid, based on soybean oil. Recommanded for manufacturing air drying enamels and primers used for decoration or in industrial fields. More

Azalchid S 66 70% long oil alkyd resin, based on soybean oil. It is recommended for manufacturing air drying enamels and primers used for decoration or protection in industrial fields. More

Azalchid S 67 80% VR – long oil alkyd resin, high solid, based on soybean oil. Recommanded for manufacturing air drying enamels and primers used for decoration or in industrial fields. More

Azalchid SPN 14X – medium alkyd resin based on soybean oil. Recommended for manufacturing  nitrocellulose based coatings: parquetry lacquers with acid curing in combination with long oil alkyd resins for air drying enamels. More

Azalchidur based on soybean oil– urethane-alkyd resin. Recommended for manufacturing pain for decoration or used in industrial fields and primers with fast drying for interior. More

Azamin M514 60% - etherified, melamine-formaldehyde resin, not plstified.  

Recommended for manufacturing air drying and stoving enamels and paints. More

Azamin U301 60% - urea – formaldehyde resin, not plastified.

Recommended in the wood industry, electro-insulating, impregnating lacquers, stoving enamels. More

unsaturated, ortophtalic polyester resin, produced as solution in styrene 65±2%, not pre-accelerated.

Recommended for manufacturing SMC and BMC. More

Azastral 60 unsaturated, ortophtalic polyester resin, produced as solution in styrene 65±2%, not preaccelerated.

It is recommended for the production of straight and corrugated sheets for roofs, various glass fibers reinforced profiles (laminates, pipes, drinking water tanks, car body components, sanitary items), polymer concrete, artificial marble, putty. More

Ortophtalic, unsaturated polyester resin, tixotropized and pre-accelerated. It is produced as soultion 58±2%, in styrene.

This resin is recommended for manufacturing various profiles reinforced with glass fibers (sanitary items, pipes for drinkable water, car bodies, etc), polymer concrete, artificial marble. More

Benzotriazole has been known for its great versatility. More importantly, it has been extensively used as a corrosion inhibitor in the atmosphere and underwater. More

Adhesive Resin. Anhydride modified ethylene acrylate resin. Contains a temperature stable ester which makes it functional in high temperature coextrusions. Available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.

Formulated to be filled with mineral fillers, preaccelerated, LSE (possible non LSE version on request), good adhesion on ABS. More

Preaccelerated, thixotropic, medium thix index, chemical resistant, (possible LSE version on request), Lloyd's approval. More

A toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts. More

Crestapol 1211A is a filled, partially accelerated, tough, urethane acrylate resin designed for applications requiring the highest levels of fire & smoke performance.  temperatures. More

A high performance structural adhesive and filleting compound which has been specially designed for bulk applications with either a 10:1 ratio catalyst or a 50:1 ratio catalyst. It exhibits non-sagging and fast gelling properties enabling the user to work with bonded parts in 2 hours. Compared to other competitive structural adhesives, Crestomer 1151A has noticeably less odour and it can be used to bond a wide range of substrates with minimal surface preparation. It has Lloyds approval. More

Crystic 1-301PA is an orthophthalic, low viscosity unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. It is pre-accelerated to give sufficient pot life for contact moulding using Andonox® KP9 catalyst at normal ambient temperatures. More

DADMAC (Diallyl Dimethylammonium Chloride) is a water-soluble monomer of cationic quaternary ammonium salt with high efficiency. There is alkenyl double bond in the molecular structure and can form linear homopolymer and all kinds of copolymers by various polymerization reaction.

Uses: TREATMENT OF WATER, OIL, GAS. 

Dimethyl carbonate is an environmentally friendly solvent used to make coatings, adhesives, and cleaning agents. DMC is also used as a raw material for organic synthesis. and in reactions that include methylation, carbonylation, and carbomethoxylation.  More 

Epoxy modified alkyd resin, water reducible after neutralization. Good pigment wetting, enhanced adhesion, rapid curing, good anticorrosion properties. More

Anionic Emulsion of Polyurethane Resin, Compatible with many water reducible alkyds and alkyd emulsions, and with most acrylic dispersions.

Used for yellowing-resistant top coats and one-coat paints for industrial application (air and forced drying) on wood, steel and aluminium with excellent gloss retention and elasticity. More

Alkyd Resin Modified with Soybean Oil.  Soluble in aliphatic, aromatic and terpene hydrocarbons, esters and ketones.

Domalkyd 1526 55 W is used in finishes for wood and metal for indoor as well as for outdoor applications. It has excellent weather resistance. More

Acrylic APEO-free emulsion, used for preparation fast drying paints. Application on asphalt, concrete, metal. More

Core-shell emulsion for wood coatings, joinery and furniture. Good anti-blocking. APEO-free version is available by request (Blue-Angel). More

OH-functional styrene-acrylic primary emulsion. Good gloss and adhesion to metal, suitable for DTM. Cost-efficient. 

Acrylic APEO-free latex resin for effect pigmented coatings (metallic, pearlescent). More

Clear and pigmented top coats with high hardness and excellent solvent and chemical resistance. More

Solvent-free PU dispersion without organic solvents. Very flexible, very good adhesion on ABS, PC, PVC, PU, PA and PS, very good pigmentability. A good plasticizer barrier on PVC-foils. More 

OH functional PU dispersion. In combination with melamine, blocked isocyanate and/or phenolic hardeners excellent applicability,

adhesion, chemical resistance and appearance is achieved. More

An anionic surfactant that is an emulsion stabilizer, excellent solubility, stable in oxidizing systems, high level of particulate soil detergency and excellent rinsibility. More

A silane/siloxane concentrate, dilutable in organic solvents to formulate a water repellent. More

Duranate™ is produced in standard, special-purpose, and function-specific versions for applications ranging from paints and coatings to adhesives, films, inks, resins, and other fields. More

DURANOL™ is a polycarbonatediol (PCD) developed by Asahi Kasei.The polyurethane using DURANOL™ has excellent durability, hydrolysis resistance and chemical resistance, and contributes to improved performance of polyurethane products. More

Flexible acrylic copolymer with a low glass transition temperature with an excellent balance between mechanical properties and dirt pick-up resistance for the production of long lasting elastomeric roof or wall coatings. More

A Reactive Elastomeric Terpolymer (RET) that can be used to modify the properties of asphalt binder used in paving. It is effective when used with a wide range of asphalts. Resulting polymer modified asphalt (PMA) is very stable, and can be stored for extended periods. More

An ethylene-octene copolymer that offers excellent performance in durable, flexible injection molded industrial and consumer goods. More

An acrylic emulsion. It exhibits good 180° peel resistance with PVC and heat resistance at 75°C. It can be used in lamination adhesives especially in blending with latex polychloroprene with no loss of adhesion.  More

A styrene acrylic emulsion for use in removable pressure sensitive adhesive applications. EPS 2123 exhibits low peel, moderate tack, and high shear values. More

EPS 2156 is an all acrylic emulsion with pressure sensitive adhesive properties for use in various applications. Typical values below are for the neat polymer. More

EPS® 2252 is a high solids acrylic emulsion designed to adhere to low energy substrates commonly used in roofing.  Basecoats and primers based on EPS 2252 offer outstanding adhesion. More

WEPS 2293 is a self-crosslinking all-acrylic emulsion offering excellent adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. EPS 2293 offers excellent performance in exterior stain formulations for deck and wood applications. More

A styrenated acrylic emulsion with excellent early water and humidity resistance. The early hydrophobic properties of EPS 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and for use in tile mastics. More

Self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness development. EPS 2570 provides the capability to formulate coatings at <100g/L VOC. More

A non-APEO all-acrylic film-forming emulsion offering excellent exterior durability and adhesion for use in exterior flat through eggshell finish house paints. More

EPS2708 is an all-acrylic emulsion designed for high alkaline applications. It can be used as a polymer admixture for cement-based products or as a binder for coatings and primers over cementitious substrates. It can also be used for Porch and Deck paints and can be formulated at < 50 g/l VOC. More

EPS 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. More

EPS 4216 is an oxidizable polyurethane dispersion designed to provide fast dry, good finished hardness, and water / humidity resistance. Coatings using EPS 4216 exhibit excellent adhesion to a variety of substrates, including wood, ferrous and non-ferrous metals, and various plastics. More

ExacTint alkyd dispersions are designed for the tinting of solvent and oil based products. The product line consists of the highest quality pigments, modified long oil alkyd vehicle and mineral spirits. More

FASTRACK™ waterborne fast-drying all-acrylic binders are designed for traffic marking paints. Highways; Local Roads; Intersections and Crosswalks; Landing Strips; Parking Lots. More

A water based, all acrylic, self cross-linking, co-polymer emulsion which is the basis of the Forton Modified Gypsum system. It can be be used in a wide range of architectural and sculptural applications and when combined with specific alpha hemi-hydrate gypsums and dry melamine resin, Forton® VF-812 at proper loadings, results in a product suitable for interior and exterior use.

GenCeal 8100 latex binder is for cement and concrete admixtures, and gypsum wallboard. It enhances the workability of cement, mortar and concrete, and allows adhesion to old and new concrete substrates. More

Heat-activated in-mold coating designed to enhance the surface of molded parts. More

Provides dual functionality of both methacrylic and epoxy groups: The chemical resistance of an epoxy with the weatherability of acrylic. Both groups readily react with a wide range of monomers and functionalized molecules. More

Water-based resin for flat exterior masonry coatings, pigmented primers or interior tension-free paints. More

Water-based resin for low VOC stain blocking primers and paints. More

Water-based stryrene butadiene copolymer for odor blocking coatings. More

A high performance olefin block copolymer that offers excellent performance in durable, flexible injection molded industrial and consumer goods. More

As the most standard material line-up in LEONA material, the 14G series is widely used in automotive applications such as cylinder head covers, torque rods, engine mounts, bush and knocking sensor housings, and it enjoys a very high reputation with the customers. More

Coatings, self crosslinking. More

A bio-based polymer, derived from corn that allows flexibility in hair care styling from stiff hold to subtle definition and textures from waxes to sprays. Boasts exceptional humidity resistance, excellent durability and frizz control. More

Methacrylic monomers are a class of “building block” chemicals used to make polymers.

Uses: RESINS, COATINGS & PLASTICS.  More

Alkali soluble resin solution. More

High density polyethylene lubricant for nonwovens, textiles, and paper applications provides lubricity, abrasion resistance, and improved finishing properties on cellulosic and synthetic fiber materials. More

water-based pressure sensitive adhesive to provide partial replacement to natural rubber latex. More

water-based pressure sensitive adhesive is suitable for removable applications, offering high solids, as well as excellent plasticizer and humidity resistance. It also provides low adhesion build and cling effect properties. More

Novocolor IP offers cutting edge technology in waterborne pigment dispersions, specifically engineered to help formulators meet stringent VOC restrictions. More

A styrene acrylate emulsion that modifies the appearance of formulations through efficient light scattering. More

PARALOID™ K-445 is a high efficiency acrylic processing aid formulated to deliver excellent performance at an optimized loading. More

Permafresh ULR concentrated durable press resin with low formaldehyde is suitable for various durable press applications. More

A liquid defoamer provides excellent, cost-effective foam control and suppression in all water-based fluid systems. Being compatible with high salt concentrations, it is ideal for seawater and salt-contaminated muds that show a high tendency of foam formation. Its high shear stability enables long lasting performance in circulated drilling fluid systems.

Water-based resin for waterproofing sealers, masonry primers, and concrete curing and sealing. More

Newtonian resin for low odor primers, waterproofing sealers, correction fluids and intumescent coatings. More

PP5 is a saturated polyester resin.

Recommended for manufacturing air drying primers and enamels for decoration or for industrial use. More

PolyFox PF-136A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications.

Incorporation into coating formulations results in dramatically reduced air entrainment which reduces surface defects. More

A non ionic, self-crosslinking acrylic polymer which can be used in a wide variety of textile applications. It is recommended for use in fabric finishing, pigment printing, fabric backcoating and as an adhesive for fiber flocking and lamination. More

Opaque polymer; One of the most advanced polymeric opacifiers engineered to improve the efficiency of TiO2. It facilitates paint application and performance improvements, lowers the consumption of TiO2 and reduces the cost of all types of water based paints. More

Vinyl Acrylic Binder, ROVACE™ Binders are used in a variety of coatings and construction. More

SB latex is a water-based emulsion of styrene-butadiene copolymer particles.  Featuring high elasticity and adhesive strength, SB latex is widely used in paper coating, carpet backing, wood lamination, and many other applications. More 

S.O.E.™ S1605 is a special SEBS with low resilience. It can be used as a modifier to improve scratch resistance and abrasion resistance of TPE compounds. It also offers good compatibility between PS and polyphenylene ether (PPE). More

S.O.E.™ S1611 is a special SEBS with low resilience. It is particularly used as a modifier to lower resilience and enhance shock absorption of foam made from EVA or TPO for shoe mid soles, sports gears or sports wears. More

Acrylic resin for masonry protection paints. More

TEXICRYL 13-013 is styrene acrylic copolymer emulsion containing a plasticizer. TEXICRYL 13-013 is suitable for paints, sealants and soft fillers applications. More

The performance of this compound has been optimized for improved dimensional stability and is heat stabilized for higher temperature applications. More

Superior dry and wet skid resistances suitable for high performance tread tire. Medium vinyl content. More

The basic grade in the broad range of styrene-butadiene block copolymers. A styrenic thermoplastic elastomer with superior elasticity, styrenic resins compatibility, moldability, adhesive performance, and asphalt blend characteristics. It is supplied in pellet form. More

Tuftec™ H1053 is designed to attain the most maximum mechanical strength in our SBES products in pellet form. More

The excellent adhesion is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1221 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei. More

Tuftec™ P5051 is a selectively hydrogenated polymer. It is used as a compatibilizer of PS and PP blends or as an impact modifier of GPPS, HIPS and PPE. More

This product delivers light to strong conditioning to hair and controlled deposit of actives. It also enables the formulation of clear shampoos with no build-up on hair and avoids volume-down effects and is recommended for sprayable products and mild surfactant systems. More

UZUAL primer is used as first coat on metallic surfaces for their protection and to provide a better adherence for subsequent coats of coating system. More

A food grade chelating agent which meets the requirements of the Food Chemicals Codex. More

Vinyl acetate monomer (VAM) is one of the key intermediate used in the making of a number of polymers and resins for adhesives, coatings, paints, films, textiles and other end-products. More

A low viscosity, anionically stabilised, highly carboxylated, cross-linked acrylic copolymer.  When neutralised, in the presence of water, with a base (e.g. ammonia, NaOH, Xyndisp 4500), particles swell significantly through electrostatic repulsive forces. This leads to effective thickening of the water phase. More

Xynburst 9615 is an organic defoamer based on sustainable raw materials, a blend of synthetic esters and fatty alcohols. Xynburst 9615 is VOC free and does not contain mineral oils, silicones/siloxanes, amines, nitrates or fluorides. More  

Xynpol AO557L is a VeoVa10 containing water based dispersion. VeoVa 10 confers exceptional hydrophobicity to the polymer design. More

Xynpol SA527L films have excellent water resistance, suitable for manufacture of coatings with exterior durability, such as road marking paints, tennis court dressings, architectural paints and building renders. More

Xynpol PA603T is designed for use in a range of non-woven and textile applications. The dried polymer cross-links at high temperatures, yielding a soft and flexible film with minimal tack and good water and solvent resistance. More

Xynpol SA510L is a new generation styrene acrylic binder designed for use in exterior coatings and high PVC interior paints. Paint films based on Xynpol SA510L yield excellent scrub performance and durability. More

Xyntrol DBE-B is a coalescing agent for waterborne systems and a tail solvent in solvent borne systems. More